The house is our home after work every day, and the times of decoration in our lifetime are very few, so the selection of materials for decoration is crucial. Quartz stone and ceramic tile are indispensable in the process of decoration. It is also a question for many people to decide which one to choose. They don't know which one is more practical. Then let me tell you which is better, quartz stone or ceramic tile, and how to identify the quality of quartz stone?

I： Quartz stone has more advantages than ceramic tiles.

1. Compared with ceramic bricks, the process of quartz stone is much simpler, and there is no need to burn it in the kiln or spray tower.

2. It is very convenient to purchase raw materials of quartz stone. Waste materials such as broken glass can be added into the raw materials to make products of different designs and colors. Waste materials can be effectively recycled.

3. Ceramic tiles have high energy consumption and relatively serious pollution. It also saves a large amount of money to use quartz in the post treatment of pollution.

4. Quartz stone is more wear-resistant than ceramic tiles. Quartz stone has high density and hard texture, which is more wear-resistant than the glaze of ceramic tiles. Quartz stone is as perfect as before after new polishing.

II; Quality identification method of quartz stone

The quality of finished finished facing stone can be identified from the following four aspects:

Observation: observe the surface structure of stone with naked eyes. Generally speaking, the uniform fine material structure stone has a delicate texture, which is a good product of stone; The stone with coarse grain and unequal grain structure has poor appearance, uneven mechanical properties and poor quality. In addition, due to the influence of geological process, some fine pulsations and microcracks often occur in natural stone, and the stone is most likely to crack along these parts, which should be removed. As for the lack of edges and corners, it will affect the appearance, so we should pay more attention to the selection. Due to the extremely high hardness of quartz stone, the processing and splicing technology of quartz stone table top is higher than that of similar products. In addition to high-quality and environment-friendly quartz stone plates, high-quality quartz stone countertops must also be accompanied by exquisite and exquisite processing technology and splicing technology, which is also a manifestation of the product's high added value.

Quantity: measure the size of the plate to avoid affecting the splicing, or causing the deformation of the patterns, patterns and lines after splicing, which will affect the decorative effect.

Try: use a simple test method to check the quality of stone. Usually, a small drop of ink is dropped on the back of the stone. If the ink is quickly dispersed and leached everywhere, it means that the internal particles of the stone are loose or there are microcracks, and the quality of the stone is poor; On the contrary, if the ink drops in place, it means that the stone is dense and of good quality. The back and internal structure of high-quality quartz stone plate are also dense and uniform, so the water absorption rate is low and the permeability is strong; However, the imitation quartz stone with backward production equipment and technology has loose and porous internal structure, so its anti permeability is weak, and it will show up over time in daily life.

Listen: Listen to the knocking sound of stone. Generally speaking, the stone with good quality, dense and uniform inside and no micro cracks has a crisp and pleasant sound; On the contrary, if there are micro cracks or fine veins in the stone or the contact between particles becomes loose due to weathering, the knocking sound is rough.

The quartz stone that accompanies you in spring, summer, autumn and winter, I choose smart stone!